How To Clean Puffco Peak Ceramic Bowl

How to Clean a Puffco Pinnacle Easily

The best mode to continue your Puffco Meridian at an optimum functioning level is to maintain information technology regularly. Nosotros'll teach y'all how to clean a Puffco summit in xv minutes or less.

Materials for cleaning the Puffco Tiptop

For cleaning yous'll need:

• 95% isopropyl alcohol or higher.


• Q-tips


• Container or Ziplock purse


• Torch for cleaning out whatsoever stain in your ceramic loving cup


• Long-nose pliers


• Soft pipe cleaners

How to clean the Puffco Peak atomizer

1. Permit the Puffco Peak cool a bit, primarily if you've used it in a long, thoroughly enjoyable session.


2. Have out the carb cap starting time also equally the tether. Unscrew off the atomizer side by side. Inspect the concluding where your atomizer sits on the rig. Use a cotton swab dabbed in alcohol to clean that expanse thoroughly to maintain good contact. Make sure to clean upwardly all of the dregs. Use the opposite side of the Q-tip to dry the terminal thoroughly. The atomizer and the terminal should be completely dry before you use the dab rig.


3. Soak the atomizer thoroughly in iso. Don't take information technology apart immediately, particularly if you've been using it for a long fourth dimension. Let the iso loosen whatsoever stuck-on parts for a good xv-30 minutes earlier you lot take it apart.


4. Accept out the atomizer and take it autonomously actually carefully. Y'all don't want to intermission the heating chemical element.


5. Utilize a Q-tip to clean all the parts of the atomizer. Be careful when separating the silicone part as you can easily break the ceramic pieces. Use wipes wet with iso to accept out all of the stains that yous can.


6. If your ceramic cup has baked-on reclaim, y'all tin can use the torch to heat out the stain gently. Hold the insert with a pair of long-olfactory organ pliers and torch the inner surface of the cup. Alternatively, you can use a dab rig and place the insert within a quartz banger. Note that this process can cause your banger to turn gray and cloudy.


7. Accept the torch away after several seconds and then torch information technology again. Don't let the loving cup heat for more than ii-3 minutes straight, or you'll cleft it. Keep going until y'all see the loving cup get almost as practiced as new.


8. Let the parts cool and dry before re-assembling.

Cleaning the bubbler attachment

1. Pull out the bubbler or the glass accessory from the base and fix information technology aside.


2. Have the bubbler and tip information technology over a glass or the sink to take out the water. Keep going until you empty the water.


3. Place the bubbler within a Ziplock bag and submerge information technology in iso. Or you can pour h2o directly inside the bubbler attachment and plug the air vent at the base of operations.


4. Milkshake the handbag or the attachment for a good 3-5 seconds to take out any residue stuck within the glass.


5. If the glass is particularly dirty, you may desire to soak information technology for 3 hours to overnight.


6. Apply pipage cleaners and carefully scrub out any stubborn residue.


7. Rinse thoroughly with warm running water until you get all of the alcohol out.

Things to consider when cleaning your Puffco Pinnacle

The atomizer is a frail affair. Don't take it apart unless necessary. The best manner to proceed it fully functional is to wipe information technology make clean with a Q-tip moisture with iso to have out any left-over concentrate.

Make sure all parts are completely dry before you lot operate your dab rig. Ever behave in listen that the Puffco Top is an e-Rig. Wet can cause damage to live wirings, so requite a flake of extra attention by wiping the parts completely dry.

Yous don't need salt to clean the bubbler zipper. You tin speed upwards the process by using warm iso. To continue things safety, yous can put the booze inside a Ziploc handbag and douse it within a bowl of hot water.

Pay attention to the lesser of the Peak bubbler. Y'all demand to go the stain out, and the best way to do information technology is to allow the bubbler soak until the remainder softens.

Maintaining Puffco Peak is easy once you know how to do information technology. Yes, it's a bit intimidating at first, considering that Puffco is a high-finish product. However, as long as you know what you're doing and you pay attention to the frail parts, deep cleaning is easy.

Do yous have any questions about how to clean a Puffco Peak? Delight don't hesitate to ask in the comment section!

14 comments

Source: https://bigdaddysmoke.com/blogs/dab-rig-posts/how-to-clean-puffco-peak

Share this post