How To Connect Remotely To Samsung Gear 360 Camera

SAMSUNG GEAR 360

Connecting Your Photographic camera to the StructionSite App

Written by CustomerSuccess
Updated over a calendar week agone

Samsung Gear 360 (2016)

Note: The instructions below are for the "eye-brawl" looking photographic camera. For the "bone" looking camera, please gyre below to the Gear 360 2017 instructions.

Make certain a micro SD menu is inserted. The card slot is located backside the door.
Turn the camera on past pressing and belongings the power push button on the side.
Make sure the camera is fully charged. On the camera screen, you lot can see the battery level.
Printing and agree the Menu button until y'all see "Gear 360 Director".
Press the Carte button twice until until you see "Google Street View".
Press the button on the top of the camera to select this mode and turn on Wi-Fi.
Make sure your phone is fully charged.
On your telephone, open the Settings app.
Connect your phone to the 360 camera'southward Wi-Fi network (which will cease in ".OSC"). The default countersign is the set of 8 numbers shown on the 2d line of the camera display.
Return to the StructionSite App and switch to 360 mode to begin taking photos

Samsung Gear 360 (2017)

All newly purchased Gear 360 2017 cameras will crave a firmware update for the camera to function with StructionSite. Do NOT go along without updating the firmware.

How to update the firmware for Gear 360 2017

Go to the iOS App Store and download the Samsung Gear 360 app
Open the Gear 360 App, and click "Go Connected" and follow the instructions on how to connect the camera using a special "Connect to iOS" instruction workflow
When continued, go back into the Gear 360 App'due south main folio and go to Settings>Firmware Version
You should be given instructions on updating the Photographic camera to the latest firmware

How to connect the Gear 360 (2017) camera to StructionSite:

Make sure a micro SD card is inserted. The card slot is located on the side of the camera.
Printing and hold the carmine Power bottom on the side of the camera to turn on the camera.
Make certain the camera is fully charged and that the SD card enough space to take photos. On the camera screen, you can see the battery level and number of photos that can be captured.
Printing and agree the Menu button (located in a higher place the power push button) until "Google Street View" appears. Do Non choice "connect to iOS". If you practice NOT come across google street view appear right away, you lot must update the firmware of your camera below.
The name of the camera's Wifi Hospot will appear on the screen (i.e. Gear 360(XXXX).OSC), along with it's password below
Open Settings on your mobile device.
Connect your phone to the 360 photographic camera's Wi-Fi network (which will terminate in ".OSC"). The default password is the set of 8 numbers shown on the 2nd line of the camera display.
Return to the StructionSite App and switch to 360 mode to begin taking photos